Scrap car shredder

 

The used car shredding machine USES the fixed knife and the moving knife to combine, the fixed knife is the s-type fixed on the top of the knife plate, and when the material enters the shell, it ACTS as the forced feeding and the forced crushing.

Used car shredder can be used to break up old cars, old bikes, old motorcycles, etc., to make iron and steel plants to recycle and reuse.

INQRUIRY

before processing:                                                                                     before processing:

before processing after processing



Automobile shredding machine can be used cars, used bicycle, used motorcycles, tricycles scrap, car cabin, car bumper, car shredding machine car car, car side panel, crushing processing, such as car keel to recycling of iron and steel works.The used car shredding machine USES the fixed knife and the moving knife to combine, the fixed knife is the s-type fixed on the top of the knife plate, and when the material enters the shell, it ACTS as the forced feeding and the forced crushing.It is easy to use the shredder and easy to change the knife.Optimization design tool post, claw knife can spread from strength, make every piece of knife shear force increased, is suitable for crushing thick material, hard material, the first class, effectively improve the tool cutting force, reducing tool wear;It has the design of electric control safety, the hopper adopts double layer structure, the inside fill the soundproof material, make the equipment has good anquan sex and environmental protection sex, the province electricity is durable.The whole machine shell of scrap car shredding machine adopts 35mm - 50mm manganese plate welding, inner lining board, strong and durable.The main shaft is used for heat treatment after the forging of the finishing piece, and the torque force is not broken. The cutter plate is cast in manganese steel, with the s-type blade in it, and the hammer head of the train wheel between the blade plate.The main machine shell adopts hydraulic lift cover device, easy to overhaul and quick, the whole machine design is generous and reasonable.And improve according to user's requirement.

model

power(kw)

speed(r/min)

yield(t/h)

Conveyor power(kw)

knife dish(piece)

cutter diameter(mm)

particle size(cm)

Bin size(m)

machine size(m)

weight(t)

DT-2600

4-160*2

16-18

25-60

4-3kw

40

Φ720

3-10

2.5*1.4

8.2*4*4.3

36

DT-1900

4-90*2

14-16

10-25

4-3kw

40

Φ560

3-10

2.3*2

8*2.5*2.4

15

DT-1500

4-45*2

14-16

8-18

4-3kw

30

Φ530

3-10

2*2

4*1.7*2.4

12

DT-1200

4-37*2

18-20

6-15

NO

28

Φ372

3-10

1.4*1

3.2*2*1.9

6

DT-1000

4-30*2

18-20

5-10

NO

30

Φ360

3-10

1.2*1

3*2*1.9

5

DT-600

4-15*2

18-20

2-5

NO

26

Φ260

3-10

0.82*0.9

2.6*2*1.9

2.5

Note: depending on the shredding material, the blade plate is different from the number of teeth and can be customized.

 Shredding machine tool structure

Working principle
The thickness of cutter and the number of knife claw can be changed according to different materials.The crushing hollow material can be equipped with the pressure material device to increase the output. Structural features:1.Crusher main bodyThe main body of the equipment adopts the high quality steel plate welding to eliminate the stress treatment/overall machining, ensuring the stability of the equipment in the long time heavy load.2.Movable knife/fixed knifeMoving blade materials using special special alloy tool steel forging blank, precision machining, heat treatment and cold heat treatment technology, the overall hardness toughness consistent repeat repair can be used, to ensure that the cutting performance and service life.It adopts patent hook installation to optimize tool replacement function, making tool maintenance and replacement more efficient.3.Bearing/sealBearing adopts patent split detachable type, can quickly remove the moving knife, knife, bearing parts, easy maintenance and replacement of cutting tools, special seal structure effectively block gouge and grease contact, deal with liquid material also can protect the bearings and gears, etc.4.Knife shaftIt adopts high strength and heavy heavy duty steel to process and refine, and it is more reasonable to cooperate with the cutter to provide powerful impetus for cutting

 

The performance characteristics of
Characteristics of iron shavings shredder:1: heavy lifting knife, high crushing efficiency, steel casting with alloy steel, long service life.2: the frame is thick and high torque, very strong.3: automatic control with microcomputer (PLC), set up, stop, reverse and overload automatic reverse control function.4: the equipment has the characteristics of low speed, high torque, low noise and dust.5. Easy adjustment, low maintenance cost, economic durability.6: the thickness and number of knives can be changed according to different materials.

Other products in the same category: