Wood shavings machine introduction
Wood shavings machine is an automatic machine mainly used for bulk production of uniform thickness wood shavings. Available shaving thickness is from 0.1mm to 1mm and shaving sizes can be customized.
Wood shaving machine working principle & structure
After feeding, materials will go through first cutting by the blades. Then enter into the crushing chamber and go through the combination crushing force of hammer mill and shear. Finally crushed materials are sent out to the discharge gate by the blowing force of the inner fan and blown out by the outer blower.
|1.The feeding port adopts automatic feeding device, the wood timber go through feeding port into machine, the wood be cut by blade(cutter), then be blow out of the machine by fan blade of cutters, then users can get uniform wood shavings.|
|2.The cutter is composed of thick steel plate and changed the original fragile, increase the service life of the machine, fan design is enhanced in the machine running speed of wood, wood from the machine speed and easy to sieve out the whole cutter head, smooth operation, regrinding the wood.|
|3.The cutting blade adopts high quality alloy cutting tools. The cutters are hard, wear resistant, cutting sharp, difficult to rust, corrosion resistant, and the service life is longer than the general steel cutting tools, the output of wood crusher is larger.|
|4.The machine adopt extensive feed port and it is convenience for raw materials, Meanwhile,it also increasing the yield. The thickened fixed blades are made of steel and installed on the inlet hopper, unique design, fixed knife working with cutter to complete wood shavings process.|
Wood shavings machine Parameter
|Main shaft speed(r/min)||500||450||400||400||400|
|Feeding inlet size(mm)||140*100||190*150||140*220||220*300||320*420|